Your washing machine is an essential piece of equipment in the home. If it becomes worn down or broken, the entire process of laundry will grind to a halt. That’s when you need the services of a professional repair engineer to look after the repairs quickly and efficiently.
One of these typical washer repairs is bound to happen sooner or later Washer Repair Los Angeles. The age of the machine and the original construction are both factors that determine which problem (or problems) arise.
When Your Washing Machine Won’t Spin
This problem could be the result of a few different and unrelated problems. A washing machine will not spin if the drum is still filled with water. That is normally caused by a blockage in the drainage pipe, either from a lost piece of laundry or a build up of soap and other debris.
Alternatively, a washer will not spin if the drum is off balance or is faulty in some ways. Washing machine repairs involving the drum include replacing the belts, repairing the motor, brushes, timer or speed control module.
When Your Machine Won’t Stop Banging
Often banging from a washer is a result of an unbalanced load. Blankets, heavy clothing and pillows can cause this problem. Also, a machine can become off balance when the bearings break, there is a suspension problem inside the washing machine or the motor needs to adjusted, calibrated or replaced.
If shifting the load of clothing in your machine doesn’t stop the banging, or when banging is continuous, call in a professional to diagnose the problem and complete the washing machine repairs.
When you’re Machine Stops Mid-Cycle
This can be the fault of a broken timer or possibly a result of a faulty valve or water heater element. Also, if the machine will not drain due to a blockage the cycle will not continue.
When Your Machine Door Won’t Open
Washing machine repairs involving the door are common. If your model contains a heat sensor that keeps the door locked, that element may need to be replaced. Alternatively, the door itself may be jammed, warped or broken or a cable inside has been snapped.
A qualified professional is the one to trust with your washer repairs. No matter what the problem is, an appliance repair engineer will know how to diagnose and repair the issue fast, getting your machine up and running as good as new.